Calling an electrician doesn't have to be stressful, and with Gaithersburg Electrical Company, it won't be. We handle electrical work for homeowners, landlords, property managers, and commercial clients across Gaithersburg and Montgomery County, Maryland. Whether you need a quick repair on a dead outlet, a full panel upgrade to handle a heavier load, or new wiring run through a finished basement, we scope the job on the phone before anything is scheduled. Local coverage. Safe wiring. Costs explained before we start.
Flickering lights, dead outlets, a breaker that won't stay reset, a burning smell coming from a wall plate: these are the calls we get every day, and each one gets the same treatment. We work through the symptom, find the source, and give you a plain answer on repair versus upgrade before a single wire is touched.
Electrical faults don't keep business hours. We're available every day from 7:00 AM to 11:00 PM, including evenings and weekends, so a fault that shows up on a Saturday night doesn't have to wait until Monday. Troubleshooting and diagnostics cover everything from GFCI and AFCI protection checks to arc-fault and ground-fault breaker testing. If the problem is in the panel, the outlet, or somewhere in the wiring between them, we find it and explain what it means for the rest of the system.
A breaker that keeps tripping is a warning worth heeding.
Older homes in Gaithersburg and across Montgomery County were often built with 100-amp service, sometimes less. That was enough for the appliances of the time. It is rarely enough now, especially when an EV charger, a new electric range, or a finished basement is added to the load. When a panel can no longer carry what the house demands, an upgrade is the right call.
We handle breaker panel replacements, fuse-to-breaker conversions, 200-amp service upgrades, and subpanel installation for additions and outbuildings. A load calculation tells us exactly what the service entrance needs to carry, and wiring work is checked against code before sign-off. Permit requirements vary by jurisdiction, and we confirm what applies at your address before the job is scheduled. Commercial properties with aging panels or expanding tenant loads are handled the same way: scope first, price confirmed, then work begins.
Before a small wiring issue turns into a hazard, it helps to know what you are actually dealing with inside the walls. Montgomery County has a significant number of mid-century and older homes, and the wiring inside them reflects that. Knob-and-tube wiring, aluminum branch circuits, and ungrounded two-prong outlets are common findings in houses built before the 1970s. None of those are automatic emergencies, but each one deserves a straight assessment.
We handle whole-home rewiring, knob-and-tube replacement, aluminum-wiring remediation, and grounding and bonding work for houses where the existing system no longer meets current expectations. Landlords and property managers dealing with rental properties often need this work done on a clear schedule and at a confirmed price. We work through the scope on the call, confirm what the job involves, and get it on the calendar. Home renovation projects, finished basements, and room additions all fall under the same approach: figure out what the existing wiring can handle, identify what needs to change, and explain it before anything is opened up.
We'll get your lights back on fast.
The everyday installs add up to a more functional, safer home. GFCI outlet installation in kitchens, bathrooms, garages, and outdoor locations keeps those circuits protected. AFCI outlets and breakers address arc-fault risks in bedrooms and living areas. USB outlets, dimmer switches, and weatherproof exterior outlets are straightforward additions that make a real difference in how a space works.
Lighting covers a wide range: recessed and LED lighting for finished rooms, under-cabinet lighting for kitchens, outdoor and security lighting, motion sensor lights for driveways and entry points, and landscape lighting wiring for the yard. Ceiling fan installation includes both new installations where no existing wiring exists and replacements where the old fixture is coming down. Hardwired smoke detectors and carbon monoxide detectors round out the safety side of what we install.
No pressure and no gimmicks, just safe, solid wiring on every job, whether it's a single outlet or a full lighting overhaul.
Some appliances need their own circuit to run safely. Electric dryers, ranges, refrigerators, microwaves, and similar high-draw equipment should not share a circuit with other loads. We run dedicated circuits for new and existing appliances, confirm the panel has capacity before the circuit is added, and make sure the wiring gauge matches what the appliance requires.
Level 2 EV charger installation starts with a panel capacity check. If the existing service can carry the added load, we run the circuit, install the outlet or hardwired charger, and confirm everything is working. If the panel needs to be upgraded first, we handle that as part of the same project. Home EV charging station wiring is one of the more common requests we get from Gaithersburg homeowners right now, and the process is straightforward once the panel situation is assessed.
A backup generator is only useful if it's wired correctly. We install transfer switches for both standby and portable generators, making sure the connection between the generator and the home's electrical system is safe and code-compliant. Whole-house generator hookups and standby generator wiring are handled the same way as any other panel work: scope confirmed, permit situation clarified, price agreed before the job starts.
A whole-house surge protector installed at the panel protects sensitive electronics, appliances, and HVAC equipment from voltage spikes that a standard power strip won't catch. It's a single installation that covers every circuit in the house.
We tell you if a permit is needed. We name the fault plainly. You decide the fix.
Gaithersburg and the surrounding parts of Montgomery County include a wide range of housing built across several decades. Post-war ranches, split-levels from the 1960s and 70s, townhomes from the 1980s, and newer construction from the past twenty years all show up in the same neighborhood. Each era brought different wiring practices, different panel types, and different expectations for what the electrical system would carry.
Homes built before the mid-1970s often have panels that were never designed for today's loads. Aluminum branch-circuit wiring turns up in homes from the late 1960s and early 1970s and requires specific handling at every connection point. Knob-and-tube wiring, where it still exists, is typically ungrounded and may have been modified over the years in ways that create new problems. None of this is unusual, and none of it is beyond a straightforward assessment and a clear explanation of what the options are.
No matter what's going wrong with your wiring, the first step is a phone call that actually covers the situation. Decisions about the work get made while you are on the phone. That means the scope is settled, the price is confirmed, and the appointment is set before anyone shows up at the property.
We work across Gaithersburg's residential neighborhoods and commercial corridors, and we cover the wider Montgomery County area including Rockville, Germantown, North Potomac, Derwood, and Montgomery Village. Residential homeowners, landlords with rental portfolios, property managers overseeing commercial buildings, and retail and office tenants needing electrical work for a buildout or repair all reach us the same way: one call, one conversation, one confirmed appointment.
Call now and we'll set the appointment.
If you've never hired an electrician before, the pricing question is usually the first one. We handle it on the call. Before anything is scheduled, we go through what the job involves, what it will cost, and what that price covers. You get the rate before we book the visit, so there is nothing to figure out after the fact.
Permit requirements are part of the same conversation. Some jobs in Gaithersburg and Montgomery County require a permit, some don't, and the answer depends on the scope and the location. We confirm what applies at your address and walk through what the permit process involves before the job starts. Electrical safety inspections follow the same pattern: we explain what the inspection covers, what we're checking, and what the findings mean before any repair or upgrade is recommended.
A plain answer on repair versus upgrade is part of every call, because the right solution depends on what the existing system can actually support.
Gaithersburg and the surrounding parts of Montgomery County include housing built across many decades, from pre-war construction to recent townhome developments, and the electrical systems inside them reflect that range. Knob-and-tube wiring, aluminum branch circuits, and undersized panels are common findings in the older neighborhoods, while newer areas tend to present different issues around load capacity and EV infrastructure. That local context shapes how we scope a job and what questions we ask on the call.
When you call (240) 982-9789, you reach someone who knows the trade and can scope the job on the call.
Decisions about the work get made while you are on the phone. That means the scope, the price, and the appointment are settled in one conversation rather than handed off to a scheduling queue.
If a specific component is not available for a same-visit repair, we tell you that on the call or during the visit before any work is started. We confirm what is needed, when it can be sourced, and what the follow-up visit will involve. Nothing is left open-ended without a clear next step explained to you first.
Before we close up and leave, we test the circuits, outlets, fixtures, or panel work involved in the job to confirm everything is functioning correctly. For permitted work, the inspection is a separate step handled through the jurisdiction, and we walk you through what that involves before it is scheduled. Wiring work is checked against code before sign-off.
The appointment is confirmed on the same call where the scope and price are settled. We go through what the job involves, what it will cost, and when the visit will happen before we hang up.
If anything about the schedule needs to change, you call us directly at (240) 982-9789.
The more specific you can be, the faster the call goes. Note when the problem started, what was happening when it appeared (a new appliance plugged in, a storm, nothing unusual), where in the house it is showing up, and whether any breakers tripped at the same time. That information helps us scope the visit accurately and give you a more precise price on the call.
No matter what you're dealing with, from a tripped breaker to a full panel replacement, the place to start is a phone call. Gaithersburg Electrical Company is available every day from 7:00 AM to 11:00 PM.
Call (240) 982-9789 and go through the job with someone who knows the work and can scope it on the call.
Call in the morning. Talk it through. Know the options by the end of the call.
(240) 982-9789